Test Mozzi Industry Nine Hydra

  • Cannondale presenta la nuova Scalpel, la sua bici biammortizzata da cross country che adesso ha 120 millimetri di escursione anteriore e posteriore in tutte le sue versioni. Sembra che sia cambiato poco, a prima vista, ma sono i dettagli che fanno la differenza e che rendono questa Scalpel 2024 nettamente più performante del modello precedente.
    Iscriviti al canale se non l'hai ancora fatto (clicca qui).


alegattis

Biker popularis
5/10/16
72
31
0
Casale Monferrato
Visita sito
Bike
Epic S-Works - Yeti SB130
Ciao, l’hai smontata da solo la ruota libera? È un lavoro difficile? Che attrezzi hai utilizzato?
Ciao, basta tirare in fuori con forza la cassetta e vien via, non devi nemmeno smontare la cassetta.
La prima volta ho tribulato un po' perchè non mi fidavo a tirare con decisione.
Puoi vedere il video ufficiale qui:
 

Gas77

Biker serius
19/6/14
254
127
0
Potenza
Visita sito
Bike
Norco Range & Aurum
Ciao, basta tirare in fuori con forza la cassetta e vien via, non devi nemmeno smontare la cassetta.
La prima volta ho tribulato un po' perchè non mi fidavo a tirare con decisione.
Puoi vedere il video ufficiale qui:
Ma io ho i torch va bene lo stesso dici? Perché sul video specifico la cassetta la rimuove
 

Gas77

Biker serius
19/6/14
254
127
0
Potenza
Visita sito
Bike
Norco Range & Aurum
Non ne ho idea, cerca dei tutorial..
Meglio ancora, ti riporto la loro mail:
“Greetings! The Torch freehub shouldn't just pull off by hand like Hydra does. It's endcap and axle interface was meant to have a much stronger hold, requiring a good bit more force or use of a tool to remove. If you can remove your Torch freehub really easily, the o-ring in the endcap has been damaged. It's a pretty common o-ring (1x17) if that o-ring gets damaged, the entire assembly could slide off when you take your wheel out of the bike and the pawls and pawl springs could go flying everywhere.
We have an endcap extractor rod to make removing that endcap much easier.“
 

alegattis

Biker popularis
5/10/16
72
31
0
Casale Monferrato
Visita sito
Bike
Epic S-Works - Yeti SB130
Meglio ancora, ti riporto la loro mail:
“Greetings! The Torch freehub shouldn't just pull off by hand like Hydra does. It's endcap and axle interface was meant to have a much stronger hold, requiring a good bit more force or use of a tool to remove. If you can remove your Torch freehub really easily, the o-ring in the endcap has been damaged. It's a pretty common o-ring (1x17) if that o-ring gets damaged, the entire assembly could slide off when you take your wheel out of the bike and the pawls and pawl springs could go flying everywhere.
We have an endcap extractor rod to make removing that endcap much easier.“
anch'io gli ho scritto e in due ore mi han risposto! TOP!
 
  • Mi piace
Reactions: Gas77

Classifica mensile dislivello positivo