Grazie a tutti.
Trovato:
Bottom bracket: The ENO crank is designed with an extremely low Q factor: 160mm ENO; 142mm for VBC. With a 68mm BB shell we recommend a 113mm square tapered bottom bracket, however, some frames have wider chainstays and need a longer BB. By simply taking a few measurements on your frame you can determine a suitable BB spindle length for your frame. First measure from the center of the BB shell back along the chainstay 180mm. At that point, measure across the stays. Your measurement should be from the outside of the stay to the opposing outside stay. If the measurement is 135mm or less, use a 113mm BB. If your measurement is higher than 135mm, then add the difference to the base 113mm to determine you BB length. For instance, if the chainstay measurement is 140mm then the BB length would be 118mm.